Description
VIVO TV Floor Stand for 13 to – Features & Prices in Saudi Arabia :
VIVO TV Floor Stand for 13 to 50 inch Flat Panel LED LCD Plasma Screens, Portable Display Height Adjustable Mount STAND-TV07
Product Dimensions
6.3 x 3.15 x 30.71 inches
Item Weight
13.2 pounds
ASIN
B01CR4Y0XO
Item model number
STAND-TV07
Is Discontinued By Manufacturer
No
Date First Available
March 9, 2016
Manufacturer
VIVO
Country of Origin
China
Test video – VIVO TV Floor Stand for 13 to :
Product highlights :
Questions & Answers – VIVO TV Floor Stand for 13 to :
Technical specifications – VIVO TV Floor Stand for 13 to :
Mounting Type
Floor Standing
Movement Type
Height Adjusting, Tilt
Brand
VIVO
Material
Alloy Steel
TV Size
50 Inches
Color
Black
Minimum Compatible Size
13 Inches
Compatible Devices
Monitors, Televisions
Maximum Tilt Angle
30 Degrees
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
H. B (verified owner) –
I have one problem with this stand… UPDATED 10-09-2021 – —Updated Notes 10-09-2021:
K. R (verified owner) –
Missing items – Assembly was a bit tedious with Allen wrench due to tight spaces turning but got it done. It’s missing M8 screws….only has M6. Need M8 size for a Samsung 43 inch. Now I need to purchase them separately. Please be clear on parts included.
M. K (verified owner) –
Very Sturdy Stand for the Money!! – I purchased this TV Stand to use outside of my RV while camping so my wife and I can watch sports outdoors when the weather is nice.. I already had the perfect TV. I was pleasantly surprised at how well built this stand is for the money. Assembly can be challenging as others have noted so I am including a few tips and pics that will hopefully make up for the lack of directions. First of all, if you lay all the parts out as pictured in the inventory section of the assembly instructions, it is much easier to identify the small pieces needed for each step. The nuts and bolts are all packaged in two bags and are layed out in the exact same order as they are depicted in the inventory picture. So lay the hardware bags out just like they are depicted in the inventory picture and you will know which nuts, bolts and washers. to use for each step of the assembly. Also, the 2nd hardware bag that has many different screws and washers in it are for the many different mounting lug configurations that come with different TVs. So don’t fret because you won’t even be using most of them which makes the task seem a little less daunting. After I assembled the Center Support (A) to the Feet (B), I noticed that the Center Support (A) does not sit dead center on the feet but is offset toward one end. FYI: Once assembled, the longer portions of the feet are designed to be toward the front of the stand. Also, the Center Support (A) has a slight angle to it (difficult to see) that causes the center pole (C) to tilt slightly toward the rear of the assembled stand. (see pics) This is to allow the poition of the TV to be more centered on the stand and the weight of the TV to be toward the front (longer) portions of the feet making it more stable; therefore, DO NOT tighten any of the nuts until you have determined that the Center Support (A) is installed in the proper direction that allows the Support Pole (C) to be tilted to the rear. I made this mistake and had to take it all apart . Once assembled, I decided to make a couple of modifications. I went to my local hardware store (LO’s) and purchased beefier washers (silver in picture) for the TV mount brackets because the washers included were not wide enough or strong enough to keep from bending when tightening the screws. I also picked up two 1/4 x 1-3/4 hitch pins (as depicted in the pic) to make adjusting the height of the stand, or disassembly of the stand for travel a breeze. These pins fit perfectly in the existing holes! Once assembled I was very pleased with the end product. Hopefully it will last for a very long time.
S. A (verified owner) –
Great product – Perfect for freeing up space. Had to get longer bolts for mounting my Samsung. Very happy overall
H. B (verified owner) –
I have one problem with this stand… UPDATED 10-09-2021 – —Updated Notes 10-09-2021:
S. A (verified owner) –
Great product – Perfect for freeing up space. Had to get longer bolts for mounting my Samsung. Very happy overall
M. K (verified owner) –
Very Sturdy Stand for the Money!! – I purchased this TV Stand to use outside of my RV while camping so my wife and I can watch sports outdoors when the weather is nice.. I already had the perfect TV. I was pleasantly surprised at how well built this stand is for the money. Assembly can be challenging as others have noted so I am including a few tips and pics that will hopefully make up for the lack of directions. First of all, if you lay all the parts out as pictured in the inventory section of the assembly instructions, it is much easier to identify the small pieces needed for each step. The nuts and bolts are all packaged in two bags and are layed out in the exact same order as they are depicted in the inventory picture. So lay the hardware bags out just like they are depicted in the inventory picture and you will know which nuts, bolts and washers. to use for each step of the assembly. Also, the 2nd hardware bag that has many different screws and washers in it are for the many different mounting lug configurations that come with different TVs. So don’t fret because you won’t even be using most of them which makes the task seem a little less daunting. After I assembled the Center Support (A) to the Feet (B), I noticed that the Center Support (A) does not sit dead center on the feet but is offset toward one end. FYI: Once assembled, the longer portions of the feet are designed to be toward the front of the stand. Also, the Center Support (A) has a slight angle to it (difficult to see) that causes the center pole (C) to tilt slightly toward the rear of the assembled stand. (see pics) This is to allow the poition of the TV to be more centered on the stand and the weight of the TV to be toward the front (longer) portions of the feet making it more stable; therefore, DO NOT tighten any of the nuts until you have determined that the Center Support (A) is installed in the proper direction that allows the Support Pole (C) to be tilted to the rear. I made this mistake and had to take it all apart . Once assembled, I decided to make a couple of modifications. I went to my local hardware store (LO’s) and purchased beefier washers (silver in picture) for the TV mount brackets because the washers included were not wide enough or strong enough to keep from bending when tightening the screws. I also picked up two 1/4 x 1-3/4 hitch pins (as depicted in the pic) to make adjusting the height of the stand, or disassembly of the stand for travel a breeze. These pins fit perfectly in the existing holes! Once assembled I was very pleased with the end product. Hopefully it will last for a very long time.
B. H (verified owner) –
Great for college dorm room – This is great for a dorm room that is all cinder block walls and you can’t hang anything. I would really like to take off half a star because it is just a little short for a someone laying or sitting in standard height dorm beds. We had to put a 6″ box under the stand to raise it up. It does not wobble and is very sturdy. It came with multiple brackets to fit any tv.
D. S (verified owner) –
Works Okay – The stand itself is sturdy enough. The VESA mounting plate can be difficult to mount on anything larger than VESA-100X100 display panel. Because in which case, extension rails are required, and they are tricky to line up to be fitted right onto the 200X200 panel. Also, for larger/heavier 43” panels, it is impossible to lock the tilt adjustment (face up/down) to an exact desired angle. This presents a problem for me needing to align three panels for multi-monitor application. For use with a single TV, this is probably okay.
D. S (verified owner) –
Works Okay – The stand itself is sturdy enough. The VESA mounting plate can be difficult to mount on anything larger than VESA-100X100 display panel. Because in which case, extension rails are required, and they are tricky to line up to be fitted right onto the 200X200 panel. Also, for larger/heavier 43” panels, it is impossible to lock the tilt adjustment (face up/down) to an exact desired angle. This presents a problem for me needing to align three panels for multi-monitor application. For use with a single TV, this is probably okay.
P. Z (verified owner) –
I wish it could tilt down not up – I don’t know why it tilt up not down
K. R (verified owner) –
Missing items – Assembly was a bit tedious with Allen wrench due to tight spaces turning but got it done. It’s missing M8 screws….only has M6. Need M8 size for a Samsung 43 inch. Now I need to purchase them separately. Please be clear on parts included.
B. H (verified owner) –
Great for college dorm room – This is great for a dorm room that is all cinder block walls and you can’t hang anything. I would really like to take off half a star because it is just a little short for a someone laying or sitting in standard height dorm beds. We had to put a 6″ box under the stand to raise it up. It does not wobble and is very sturdy. It came with multiple brackets to fit any tv.
O. T (verified owner) –
Excellent, but 1st ensure your TV/screen mount has the clearance – Installed on a 43″ PC display with a rear ‘bump’. I knew I had to accommodate my display’s bump but it worked perfectly because worse case, I can swivel the mount upwards by a little. Turns out it was perfectly fine because the VESA expansion brackets provided gave some extra space. If you have a flat rear TV mount without obstructions, you’ll have no problem on the very strong display.
P. Z (verified owner) –
I wish it could tilt down not up – I don’t know why it tilt up not down
O. T (verified owner) –
Excellent, but 1st ensure your TV/screen mount has the clearance – Installed on a 43″ PC display with a rear ‘bump’. I knew I had to accommodate my display’s bump but it worked perfectly because worse case, I can swivel the mount upwards by a little. Turns out it was perfectly fine because the VESA expansion brackets provided gave some extra space. If you have a flat rear TV mount without obstructions, you’ll have no problem on the very strong display.